Why is the T flip-flop called so?

In the T flip – flop, a pulse train of narrow triggers are provided as input (T) which will cause the change in output state of flip – flop. So, these flip – flops are also called Toggle flip – flops.

electronicshub.org - T Flip Flop | Toggle Flip-Flop, Circuit (NOR, NAND), Working, Applications

Where are heavy metals stored in the body?

Once in the body, heavy metals can accumulate over time in your bones, liver, brain, kidneys and heart. Having excess heavy metals in the body can...

Last updated May 9, 2021

Does avocado have fiber?

A whole medium avocado contains about 240 calories, 13 grams carbohydrate, 3 grams protein, 22 grams fat (15 grams monounsaturated, 4 grams...

Last updated May 29, 2022

Weird “juice ritual” removes 65lbs in weeks

A potent powdered supplement, based on the diets of among the healthiest, longest-living hamlet in the world.

Learn More »

Promotion

In this tutorial, we will learn about another important flip-flop known as the T Flip-Flop. We will learn its design, working and also couple of applications of T Flip Flop.

Introduction

T flip – flop is also known as “Toggle Flip – flop”. To avoid the occurrence of intermediate state (also known as the forbidden state) in SR flip – flop, we should provide only one input to the flip – flop called the Trigger input or Toggle input (T). Then the flip – flop acts as a Toggle switch. Toggling means ‘Changing the next state output to complement of the present state output’. We can design the T flip – flop by making simple modifications to the JK flip – flop. The T flip – flop is a single input device and hence by connecting J and K inputs together and giving them with single input called T, we can convert a JK flip – flop into T flip – flop. So, a T flip – flop is sometimes called as single input JK flip – flop. The logic symbol of T flip – flop is shown below. It has one Toggle input (T) & one clock signal input (CLK).

T Flip – Flop Circuit

We can construct a T flip – flop by any of the following methods:

Connecting the output feedback to the input in SR flip – flop.

Hard – wiring the J and K inputs together and connecting it to T input in JK flip – flop.

Using SR Flip-Flop

We can construct a T flip – flop by connecting AND gates as input to the NOR gate SR latch. And one of the inputs to these AND gates are the feedback from the present state output Q and its complement Q to the respective AND gates i.e., Q to the AND Gate associated with R input and Q to the AND Gate associated with S input. A toggle input (T) is connected in common to both the AND gates as an input. The AND gates are also connected with common Clock (CLK) signal. In the T flip – flop, a pulse train of narrow triggers are provided as input (T) which will cause the change in output state of flip – flop. So, these flip – flops are also called Toggle flip – flops. The circuit diagram of a T flip – flop constructed from SR latch is shown below.

Using D Flip-Flop

Similarly, a T flip – flop can be constructed by modifying D flip – flop. In D flip – flop, the output Q is XORed with the T input and given at the D input. The circuit of a T flip – flop constructed from a D flip – flop is shown below.

Using JK Flip-Flop

What is in a Tropicolada smoothie from Tropical Smoothie?

Tropi Colada contains three delicious fruits: banana, mango and coconut. Jan 19, 2021

Last updated Dec 21, 2020

How can I clean my face naturally?

5 homemade cleansers you should try Milk. Milk acts as a perfect facial cleanser as it has lactic acid that helps remove dead skin cells and unclog...

Last updated Jul 26, 2020

Purple weed obliterates 72lbs of flab

The main ingredient for a potent powdered supplement, based on the diets of among the healthiest, longest-living hamlet in the world.

Learn More »

Promotion

The simplest of the constructions of a T flip – flop is with JK flip – flop. The J input and K input of the JK flip – flop are connected together and provided with the T input. The logic circuit of a T flip – flop constructed from a JK flip – flop is shown below.

Working

T flip – flop is an edge triggered device i.e., the low to high or high to low transitions on the input clock signal will cause a change in the output state of the flip – flop.

Truth Table of T flip – flop

The truth table of a T flip – flop is shown below.

As mentioned earlier, T flip – flop is an edge triggered device. For example, consider a T flip – flop made of NAND SR latch as shown below. If the output Q = 0, then the upper NAND (NAND C) is in disable state (doesn’t have any dominating inputs) and lower NAND (NAND D) gate is in enable condition (feedback from Q is the dominating input). This means, the the Toggle Input will set the input condition for the RS Flip-Flop as R = 1 and S = 0. If you recall the truth table of RS Flip-Flop, this condition will SET the output. Hence, Q becomes 1. If the output Q = 1, then the upper NAND is in enable state and lower NAND gate is in disable condition. This allows the Toggle Input to set the inputs for the RS Flip-Flop as R = 0 and S = 1. This will make the flip – flop to RESET i.e., Q = 0.

In simple terms, the operation of the T flip – flop is

When the T input is LOW, then the next sate of the T flip flop is same as the present state. T = 0 and present state = 0, then the next state = 0 T = 0 and present state = 1, then the next state = 1 When the T input is HIGH and during the positive transition of the clock signal, the next state of the T flip – flop is the complement of the present state. T = 1 and present state = 0, then the next state = 1 T = 1 and present state = 1, then the next state = 0 As each incoming trigger alternately changes the SET and RESET inputs, the flip – flop toggles. So, to complete one full cycle of output waveform, it need two triggers. This means that the T flip flop produces the output at exactly half of the frequency of input frequency. So a T flip – flops will act as “Frequency Divider Circuit”. The main disadvantage of T flip – flop is that the state of the flip – flop at an applied trigger pulse is known only when the previous state is known.

Which juice is good at night?

Drinking 2 cups (480 ml) of cherry juice per day may increase your melatonin levels and improve your sleep overall. Nov 4, 2019

Last updated Aug 4, 2018

Does anger shorten your life?

“Stress is very tightly linked to general health. If you're stressed and angry, you'll shorten your lifespan,” says Fristad. A University of...

Last updated Nov 1, 2018

7-second natural hack eats through 64lbs of belly flab

This effective juice jolts the metabolism, boosts energy and burns fat all day.

Learn More »

Promotion

Generally, T flip flops are not available as ICs. So, they can be constructed by using JK flip – flop, SR flip – flop and D flip – flop. The symbol of T flip – flop made from JK flip – flop is shown below.

Applications

Let us now see a couple of important applications of T flip-flop.

Frequency Division Circuit

2 – Bit Parallel Load Registers

Frequency Division Circuit

A T flip–flop can be used as a ‘Frequency Divider Circuit’ by feeding back the complementary output Q’ to the T input. The logic symbol of a frequency divider using T flip – flop is shown below. If the input clock frequency of the T flip-flop is ‘f’ Hz, then frequency of the pulse at output Q is ‘f/2’ Hz. We can cascade many such frequency divider circuits to further divide the frequency.

2-Bit Parallel Load Register using T flip – flops

We use registers and shift registers to store the data. But the size is always a primary concern for memory elements such as registers. So, we use 2 – bit parallel load registers instead 4 – bit registers. There are two operations to be considered when designing a parallel load register:

Hold the Data

Parallel Load the Data

To hold the output of T flip – flop, simply the input T should be 0. But the Parallel Load is a difficult part. Parallel Load means to get the value X at the output of the flip – flop. In order to do that, we XOR the X input and present state output and give it to 2 to 1 MUX. The other input to the MUX is a constant 0 (logic low). The output of the MUX is connected to the input of the T flip – flop. Since it is a 2–bit register, two such combinations are needed. The circuit of a 2 – bit parallel load register is shown below.

Conclusion

A simple beginner’s tutorial on T Flip-Flop, which is also known as Toggle Flip Flop. You learned how to design a T flip-flop using other flip-flops like SR flip-flop, JK flip-flop and D flip-flop, the working of the Toggle Flip-Flop, truth table of T Flip-Flop and also couple of useful applications.

electronicshub.org - T Flip Flop | Toggle Flip-Flop, Circuit (NOR, NAND), Working, Applications

Which is better green tea or Matcha green tea?

Matcha contains about three times more antioxidants than high quality regular green tea. As such, 2 cups (474 mL) of matcha may provide the same...

Last updated Jul 16, 2021

What are the 4 types of drinker?

There are four types of drinker – which one are you? Social drinking. To date, nearly all the research on drinking motives has been done on teens...

Last updated Jan 3, 2020

Strange purple cocktail removes 2.7lbs every 4 days

Contains a potent powdered supplement blended right into water or your favored beverage to be appreciated as a scrumptious morning smoothy.

Learn More »

Promotion

What is the fruit of faith?

Jesus is using a growing analogy to help us think about our faith and in particular, how we are living our faith and letting it show in our lives....

Last updated Jan 13, 2020

Traditional “juice” activates 24/7 fat-burning

A scrumptious morning smoothy based on the diets of among the healthiest, longest-living hamlet in the world.

Learn More »

Promotion

Does sprouts increase belly fat?

Sprouts are high in protein and fiber. They are low in calories and also help in boosting your digestion. Regular consumption of sprouts, when...

Last updated Nov 28, 2020